The Matex products include down hole lubricants, specialty polymers, foams, tool lubricants, blast hole stabilizers, thread compounds and non-alcohol environmentally safe freeze control fluids. These products are used for diamond drilling, horizontal directional drilling, rotary and percussive drilling.
RDO 302 ES is a unique product developed for all types of drilling where rock drill oils are used, such as D.T.H., air tracks percussive drills, casing drivers and top hammers to save wear and improve their performance.
TRI-LUBE is an environmentally safe, high lubricity, water soluble lubricant, designed to extend the life of air bearing roller stabilizers, drill steel and rotary three-cone drill bits.
Foamer ES is a non alcohol-based foam used for diamond and rotary drilling. It provides an acceptable foaming agent to be used in mineral exploration, oil and gas exploration and water well drilling operations.
A unique cost saving fluid formulated to speed up hole collaring, reduce collar sloughing and stabilize the borehole.
The Matex Fluid Injector is AIR operated and TIME activated. It is completely self-contained and easy to install. The Matex Fluid Injector can be used to inject a wide range of different products such as Tri-Lube, RDO-302 ES, Hole Control, Vibra-Stop, Liquid polymers, Foam etc. If injecting foam, a Matex soluble lubricant must be used to avoid rust that could be caused from the foam.
The pump is designed to deliver a measured amount of product each injection to ensure a proper mixture. The pump has been designed with only one moving part to ensure low maintenance.
The timer assembly is available in a range of different voltages and is designed to measure the exact amount of injection necessary to deliver the amount of product desired. The timer has a setting dial on the face of the timer for the ease of increasing or decreasing the amount of product necessary, or timer can be pre-set for lubricating at a set rate.
The Matex Lubricator is AIR operated and TIME activated. The Matex Lubricator is completely self-contained and easy to install. The Matex Lubricator can be used to inject a wide range of different products such as Tri-Lube, RDO-302 ES, Foam etc. If injecting foam, a Matex soluble lubricant must be used to avoid rust that could be caused from the foam.
The pump is designed to deliver a measured amount of product each injection to ensure a proper mixture. The pump also has been designed with only one moving part to ensure low maintenance.
The timer assembly is available in a range of different voltages and is designed to measure the exact amount of injection necessary to deliver the amount of product desired. The timer is also available with a setting dial on the face of the timer for ease of increasing or decreasing the amount of product necessary, or timer can be pre-set for lubricating at a set rate.
